Boss WAZA-AIR Using Manual page 65

Parameter
HIGH-MID Q
LOW CUT
HIGH CUT
Value
0.5–16
FLAT, 20
Hz–800 Hz
630 Hz–
12.5 kHz,
FLAT
Explanation
Adjusts the width of
the area affected by
the EQ centered at the
HIGH-MID FREQ. Higher
values will narrow the
area.
This sets the frequency
at which the low cut
filter begins to take
effect. When "FLAT" is
selected, the low cut
filter will have no effect.
This sets the frequency
at which the high cut
filter begins to take
effect. When "FLAT" is
selected, the high cut
filter will have no effect.
65