Boss WAZA-AIR Using Manual page 34

TRANSMITTER'S STANDBY SENSING
Value
MOTION
SENSING
SOUND
SENSING
MEMO
When you change the setting, plug the transmitter
into the WAZA-AIR unit. AUTO WIRELESS
CONNECTION will operate, enabling the setting.
Explanation
If the transmitter that's plugged into
the guitar is powered-on, the unit
automatically enters standby mode if no
vibration is detected for a certain interval
of time.
In this case, the power automatically turns
on when the transmitter detects vibration.
If the transmitter that's plugged into
the guitar (instrument) is powered-on,
the unit automatically enters standby
mode if a silent state in which the guitar
(instrument) is not played continues for a
certain interval of time.
In this case, the power automatically turns
on when the transmitter detects a signal.
34