Table of Contents
Advertisement
Manually adjusts the shape and size of an image that is
unevenly rectangular on all sides. Press "MODE" repeatedly
to select the corner that you wish to adjust. Press four
directional selection keys to adjust the image shape.
4 Corner
Correction
Sets the default size of the projected image. You can further
zooms in or out the image by pressing
Digital Zoom
functions of Digital Zoom Out and Image Shift together helps
Out (Install)
you fit the projected image full screen without adjusting the
existing ceiling mount settings.
Shifts the projected image by pressing
Image Shift
Resolution is WUXGA, this functions is only available when
the setting of Digital Zoom Out (Install) is less than 1.0.
Adjusts the sharpness of the image.
•
Sharpness
•
H. Position
•
(Horizontal
•
Position)
V. Position
•
(Vertical
•
Position)
Changes the projector's refresh rate to match the frequency
of your computer's graphics card. If you experience a vertical
Frequency
flickering bar in the projected image, use this function to
correct it.
Synchronizes the signal timing of the display with the
Tracking
graphics card. If you experience an unstable or flickering
image, use this function to correct it.
Please adjust 4-corner correction separately for each
aspect ratio, and its memory is allowed to save 4 sets of
settings only.
Press
to decrease the sharpness.
Press
to increase the sharpness.
Press
to move the image left.
Press
to move the image right.
Press
to move the image down.
Press
to move the image up.
21
. Using the
. When Native
Hide quick links:
Advertisement
Table of Contents
