Management - Acer PD1330W Series User Manual

28

Management

Choose "ECO" to dim the projector lamp, which will also
lower the power consumption, reduce noise, and extend
ECO Mode
the lamp life. Choose "User" allows you to adjust the light
source power. Choose "Off" to return to the normal mode.
This function is only available when "Custom" is selected
Light Source in the ECO Mode menu. You can adjust the light source
Power power to extend the light source life and decreases the fan
noise.
Choose "On" to turn on the High Altitude mode. When
this function is turned on, the projector fans operate at full
High Altitude
speed continuously to cool down the projector's
temperature.
Auto Shutdown
The projector will automatically shut down while there is
(Minutes)
no signal input detected after the time you set.
•
Menu Display
•
Time (Seconds)
AC Power On
Selecting "On" enables the function. The projector will
automatically turn on when power is supplied via the
power cord.
HDMI Power On
Selecting "On" enables the function. The projector will
automatically turn on when power is supplied via the
Auto Power On
power cord and the HDMI signal is supplied via the HDMI
cable.
VGA Power On
Selecting "On" enables the function. The projector will
automatically turn on when power is supplied via the
power cord and the VGA signal is supplied via the VGA
cable.
5/15/30: Chooses the length of time the OSD menu
will remain active after your last key press.
Manual: The OSD menu remains active. The only way
to launch or exit the OSD menu is by pressing
"BACK".