Table of Contents
Advertisement
Assembly Instructions:
1)Position the Arms so that
they fits into the seat,you
will hear a "click" when
they are in place.
3)The pins must be connected
correctly.
2) Position the Back(refer to point
1） Connect Recliner supply cable
pins.Fit the pins properly in the
manner shown in the image. Do
not force them,they only have one
correct position.
4)Pull the switch inside the right
armrest as shown and then
recline the chair freely.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 700-088 and is the answer not in the manual?
Questions and answers