█ Sound
No sound
Cancel muting. (
•
Check the connections to the other devices.
•
~
(
8, 9)
Make sure that the received audio signal is
•
compatible with this system.
If the system is connected to the TV with an HDMI
•
cable only, make sure that the HDMI terminal of the
TV is labelled "HDMI (ARC)". If not, connect an
optical digital audio cable. (
Check the connections. Change the cables if the
•
connections are correct.
Check the audio output settings on the connected
•
device.
The situation may improve by changing the digital
•
audio output setting on the connected device from
"Bitstream" to "PCM".
The dual audio cannot be changed from main to
secondary.
If the audio received from the connected device is
•
not "Dual Mono" or the output setting is not
"Bitstream", the setting cannot be changed from this
system. Change the setting on the connected
device.
The sound lags behind the image.
Depending on the TV, when this system is
•
connected to it via Bluetooth
from this system may lag behind the TV image.
Connect this system and the TV with an HDMI
cable/optical digital audio cable. (
The audio format shown on the display does not
correspond to the playback source.
If the playback source is Dolby Digital or DTS
•
the audio output setting of the connected equipment
(e.g., TV, player) to bitstream. For details, refer to
the operating instructions for the connected
equipment.
There is no audio.
The power of the main unit switches off
automatically.
(When the main unit detects a problem, a safety
measure is activated and the main unit automatically
switches to standby mode.)
There is a problem with the amplifier.
•
Is the volume extremely high?
•
If so, lower the volume.
Is this system placed in an extremely hot place?
•
If so, move this system to a cooler place and wait a
few moments and then try to switch it on again.
If the problem persists, confirm the indicators status,
switch off this system, disconnect the AC mains lead
and consult your dealer. Please be sure to remember
the indicators status and inform the dealer.
22
~
18)
~
8)
, the sound output
®
~
8)
█ Active subwoofer
No power.
Make sure the AC mains lead of the active
•
subwoofer is connected.
After switching on the subwoofer, it immediately
switches off.
Disconnect the AC mains lead and consult your
•
dealer.
No sound from the subwoofer.
Check that the active subwoofer is switched on.
•
Check that the WIRELESS LINK indicator switched
•
on. (~17)
The WIRELESS LINK indicator does not switched
on.
There is no link between the main unit and the
•
active subwoofer.
Check that the main unit is switched on.
The active subwoofer and the main unit may not be
•
paired correctly. Try the following operation.
(Wireless pairing)
Switch on the main unit.
A
Press and hold [I/D SET] on the rear of active
B
subwoofer for a minimum of 4 seconds.
The wireless link indicator will blink.
Select "SW PAIR" in the Setup Menu. (
C
When the wireless pairing is successful, "DONE"
is shown and WIRELESS LINK indicator lights
up.
Switch off and then switch on the main unit.
D
Consult your dealer if the problem persists.
█ Display
, set
®
"F61"
There is a problem with the amplifier of the system.
•
Disconnect the AC mains lead and consult the
•
dealer.
"F70 HDMI" / "U701" / "U703"
Check HDMI connection.
•
Switch off the main unit and then switch it on again.
•
Disconnect the HDMI cable.
•
"F703"
Switch off the main unit and then switch it on again.
•
Consult your dealer if the problem persists.
•
"LINK"
This system is trying to connect to the last
•
connected Bluetooth
"REMOTE 1" / "REMOTE 2"
The remote control and the main unit are using
•
different codes. Change the code of the remote
~
control. (
"U702"
There is a problem with the HDMI functionality,
•
consult your dealer for instructions.
[HTB600]
device when "BT" is selected.
®
23)
~
19)