Panasonic SC-HTB400 Operating Instruction page 15

3
Drive the screws into the wall.
Use the measurements indicated below to identify the screwing positions on the wall.
•
Leave at least 100 mm of space above of the main unit to allow enough space for fitting the main
•
unit.
Be sure to use a level to ensure that both mounting holes are level to each other.
•
Front view (semi-transparent image)
129 mm
26 mm
53 mm
Wall mounting hole
4
Fit the main unit securely onto the screws.
Move the speaker so that the
screw is in this position.
Ø4.0 mm
Wall or pillar
DO
> 30 mm
Ø7.0 mm - Ø9.4 mm
3.5 mm - 4.5 mm
694 mm
139 mm
Wall mounting hole
DO NOT
In this position, the speaker will
likely fall if moved to the left or
right.
15