Radio Operation; Switch Between Us And Eu Frequency; Change Bands; To Store / Recall Preset Stations - Boss Audio Systems 609UAB User Manual

Bluetooth/200 watts/ single-din mp3-compatible digital media am/fm receiver
Table of Contents

Advertisement

Radio Operation

Switch Between USA area and Europe area Frequency
In radio mode, press the SEL button to enter the switch state of the US
(USA) and EU(europe)frequency, then rotate it to switch between US(USA)
and EU(europe) frequency. The system will change the frequency setting in
about 3 seconds.

Change Bands

In radio mode, shortly press the BAND button to switch between the
FM1(F1), FM2(F2), FM3(F3) and AM1(A1), AM2(A2) bands.

To Store / Recall Preset Stations

The radio can be stored 6 preset stations for each band (FM1, FM2, FM3,
AM1 and AM2) for atotal of 30 preset stations.
- To memorize a station:
Press and hold the desired preset buttons (1-6) to save a radio station.
- To recall a preset station:
Briefly press the respective station button (1-6) to recall the corresponding
preset station.
Manual Tuning
In the radio mode:
Press and hold the
or
button to enter the manual tuning mode.
In manual tuning mode, briefly press the
or
button to search the next
or previous frequency step by step.
Seek Tuning
In radio mode, press the
or
button, the automatic search will start, it
will search upward or downward for the strong signal radio station within the
current band. The auto searching will stop until find a station.
Automatic Store Station / preset station scan (
)
Press and hold the
button to store 18 FM stations and 12 AM stations
automatically.
Briefly press the
button to recall each preset station that stored in the
memories in each band.

LOCAL/DX

In urban areas, most stations are strong enough and "LOCAL ON" mode
should be selected. Switch to LOCAL OFF mode to search for stations with
weaker signals. Press the LOC button on the remote control to choose local or
distant reception mode.

STEREO/MONO

FM station is received in stereo mode. However, if the signal is weak or reception
is not asgood as you would like, switching to MONO mode usually improves
the overall sound quality. Press the ST button on the remote control to choose
FM STEREO or MONO audio effect.
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents