Advertisement
C o mmo n Settin g s
< Setup Wizard >
WHG505 provides a Setup Wizard for quick
configuration. To quickly configure WHG505 by
using the Setup Wizard, click on the Setup Wizard
button to start the configuration process.
Step 1: General
•
Enter a new password in the New Password
field, and re-enter it again in the Verify
Password field (a maximum of 20 characters
and no spaces allowed in between).
•
Select an appropriate time zone from the Time
Zone drop-down list box to set up the system
time.
•
Click Next to continue.
For security concern, it is strongly
recommended to change the
administrator' s password
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
W H G5 0 5
Secur e W L A N C o n t r o l l er
Step 2: WAN1 Interface
For setting up both wired WAN and wireless LAN
functions:
•
Select a proper type of Internet connection for
WAN1 interface from the following three
available connections: Static, Dynamic, or
PPPoE. Your ISP or network administrator can
advise on the connection type available to you.
Below depicts an example for Dynamic.
•
Click Next to continue.
Step 3: Local User Account (Optional)
New local accounts can be created and added into
the database via this optional function. If local user
accounts are not required, click Skip to go directly to
Step 4. However, It is recommended to create at
least one local user account in order to verify the
system's readiness upon completion of this Setup
Wizard.
•
Enter the Username (e.g. "testuser) and
Password (e.g. "testuser") to create a new local
account.
•
Click Next to continue.
•
More local accounts can be added by clicking the
Back button in Step 4.
Quick Installation Guide
E N G L I SH
Advertisement
