F&F FW-WSO2 Manual

F&F FW-WSO2 Manual

2-channel remote control transmitter

Advertisement

Quick Links

FW-WSO2
2-channel remote control
transmitter
Do not dispose of this device to thrash with other unsorted waste! In accordan-
ce with the Waste Electrical and Electronic Equipment Act any household electro-wa-
ste can be turned in free of charge and in any quantity to a collection point established
for this purpose, as well as to the store in the event of purchasing new equipment (as
per the old for new rule, regardless of brand). Electro-waste thrown in the trash or aban-
doned in the bosom of nature pose a threat to the environment and human health.
Description of the system
F&Wave is a family of wireless devices controlled by radio with a range of up to 100
meters*. The receivers are available in either a DIN-rail mounting version (housing 1S)
or a Ø60 flush-mounted version. The transmitters are available as handheld remo-
te controllers or as a flush-mounted version. The receivers relay control signals. The
device that receives a control signal from the transmitter will automatically send it
forward, which allows to increase the range of the remote control.
* Range of up to 100 meters in open space without any interfering factors. In building conditions and in the presence of
interference sources (power lines, transmitters, etc.) the actual range may be smaller.
F&F Filipowski sp. j.
Konstantynowska 79/81, 95-200 Pabianice, Poland
phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71
www.fif.com.pl; e-mail: biuro@fif.com.pl
- 1 -
Wireless system

Advertisement

Table of Contents
loading

Summary of Contents for F&F FW-WSO2

  • Page 1 Wireless system Konstantynowska 79/81, 95-200 Pabianice, Poland phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71 www.fif.com.pl; e-mail: biuro@fif.com.pl FW-WSO2 2-channel remote control transmitter Do not dispose of this device to thrash with other unsorted waste! In accordan-...
  • Page 2: View Of The Device

    Characteristics The FW-WSO2 is a 1-button, 2-channel remote control transmitter belonging to еhe Ospel family of Sonata accessories and is dedicated to operate with all F&Wave family devices. Device characteristics: Independent control of two receivers or two groups of devices;...
  • Page 3 Mounting The FW-WSO2 button can be glued directly to a wall or other surface using double-si- ded adhesive tape or fixed to a standard ø60 mm installation box. Mounting in the installation box: Remove the button key by gently lifting the lower or upper edge of the button ①...
  • Page 4 Pairing Refer to the user manual of the receiver for a detailed description of pairing and unpairing of the buttons with the receiver. The following is an example of how to handle receivers: FW-R1, FW-R2, FW-STR1, FW-LED2, FW-D1. ① Once the receiver is correctly connected, press and hold the PROG button until the device switches on the output circuit and the communication LED goes out.
  • Page 5: Battery Change

    Battery change Remove the button key by gently lifting the lower or upper edge of the button ① with a flat tool. ② Unscrew the marked screws. ③ Remove the electronics board. Eject the used battery and insert the new one, paying special attention to the ④...
  • Page 6: Technical Data

    F&Wave system device Transmitters Receivers Ø60 box DIN rail flush-mounted Single relay FW-R1P FW-R1D FW-RC4-AC, FW-RC5 FW-R1P-P FW-R1D-P remote controls Double relay FW-R2P FW-R2D FW-RC4, FW-RC10, FW-KEY4 FW-R2P-P FW-R2D-P wall buttons Universal dimmer FW-D1P FW-D1D FW-WS1, FW-WS2, FW-WS3 glass buttons Roller blind controller FW-STR1P FW-STR1D...
  • Page 7: Warranty

    Warranty F&F products are covered by a 24 month warranty from the date of purchase. The warranty is effective only with a proof of purchase. Contact your dealer or directly with us. For more information on the procedure for submitting a warranty claim visit our webpage: www.fif.com.pl/reklamacje CE declaration F&F Filipowski sp.

Table of Contents