Download Print this page
F&F FW-RC4-AC Manual

F&F FW-RC4-AC Manual

Advertisement

Quick Links

FW-RC4-AC
Transmitter for Ø60
flush-mounted box
Do not dispose of this device to thrash with other unsorted waste! In accordan-
ce with the Waste Electrical and Electronic Equipment Act any household electro-wa-
ste can be turned in free of charge and in any quantity to a collection point established
for this purpose, as well as to the store in the event of purchasing new equipment (as
per the old for new rule, regardless of brand). Electro-waste thrown in the trash or aban-
doned in the bosom of nature pose a threat to the environment and human health.
Description of the system
F&Wave is a family of wireless devices controlled by radio with a range of up to 100
meters*. The receivers are available in either a DIN-rail mounting version (housing 1S)
or a Ø60 flush-mounted version. The transmitters are available as handheld remo-
te controllers or as a flush-mounted version. The receivers relay control signals. The
device that receives a control signal from the transmitter will automatically send it
forward, which allows to increase the range of the remote control.
* Range of up to 100 meters in open space without any interfering factors. In building conditions and in the presence of
interference sources (power lines, transmitters, etc.) the actual range may be smaller.
F&F Filipowski sp. j.
Konstantynowska 79/81, 95-200 Pabianice, Poland
phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71
www.fif.com.pl; e-mail: biuro@fif.com.pl
- 1 -
Wireless system

Advertisement

loading

Summary of Contents for F&F FW-RC4-AC

  • Page 1 Konstantynowska 79/81, 95-200 Pabianice, Poland phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71 www.fif.com.pl; e-mail: biuro@fif.com.pl FW-RC4-AC Transmitter for Ø60 flush-mounted box Do not dispose of this device to thrash with other unsorted waste! In accordan-...
  • Page 2 Installation of this device should be carried out by a qualified installer after reading this manual. Dismantling the casing of the device will au- tomatically void the warranty. Before starting the assembly, make sure that the connecting wires are not live. Conditions of storage, transport and use affect the proper operation of the device.
  • Page 3: Description Of The Device

    Description of the device Connection L - power supply L N - power supply N S1 - general control input or OFF S2 - general control input or ON S3 - general control input S4 - general control input Control input does not work with backlighted buttons.
  • Page 4 Pairing ① After you successfully connect the receiver, press and hold the PROG button until the device switches on the output circuit and the communication LED goes off. ② Press the selected button connected to the flush-moun- ted transmitter. If the pairing is correct, the output circuit will be momentary switched off ③...
  • Page 5: Button Configuration

    F&Wave system devices Transmitters Receivers Ø60 box DIN rail flush-mounted Single relay FW-R1P FW-R1D FW-RC4-AC, FW-RC5 Double relay FW-R2P FW-R2D remote controls Universal dimmer FW-D1P FW-D1D FW-RC4, FW-RC10 Roller blind controller FW-STR1P...
  • Page 6: Technical Data

    Technical data power supply 80÷265 V AC/DC control inputs 85÷265 V AC; <1 mA power consumption operating mode 0.5 W standby 0.25 W radio frequency 868 MHz working temperature -25÷65°C terminal 2.5 mm² screw terminals tightening torque (max) 0.4 Nm mounting Ø60 flush-mounted box dimensions...