3-3.
SUB PANEL ASSY
3 sub panel assy
Note: When installing the sub panel assy,
align two ribs and two holes.
3-4.
CD MECHANISM DECK (MG-101CF-188)
Note 1: The service manual of the mechanism deck, used in this model has
been issued in a separate volume. Please refer to the service manual
of the MG-101 series for the mechanism deck information.
Note 2: When installing the CD mechanism block,
align the rib and the slot.
7 CD mechanism deck
(MG-101CF-188)
4 cable flexible flat (27 core)
(FFC1) (CN401)
1 two screws
(PTT2.6
Note 3: When installing the cable flexible flat (27 core) (FFC1), insert straight to the connector and lock a connector completely.
No slanting after insertion.
OK
Insert is straight to the interior.
cable flexible flat
(27 core) (FFC1)
connector
2 two claws
rib
1 two screws
(PTT2.6
6)
6 bracket (CD)
1 screw
(PTT2.6
6)
slot
6)
NG
Connector is unlock.
cable flexible flat
(27 core) (FFC1)
connector
hole
hole
rib
5 two screws
(PTT2.6
Note 2: When installing the CD mechanism block,
2 Lift up the CD mechanism block
in the direction of the arrow.
3 connector
(CN701)
slot
1 screw
(PTT2.6
NG
Insert is incline
cable flexible flat
(27 core) (FFC1)
connector
MEX-GS810BH/N6000BH
2 two claws
4)
align the rib and the slot.
6)
NG
Insert is shallow
cable flexible flat
(27 core) (FFC1)
connector
19