Perenio PECMS01 Quick Start Manual

Dear Customer, thank you for choosing Perenio® products!
The Motion Sensor is sensitive to movements of thermal objects in the area of
its installation. It is used as part of the Perenio Smart Building Management
System upon detection by Perenio® Gateway/IoT Router.
BASIC FUNCTIONS AND KEY BENEFITS
Compatibility
Specification*
Functions
Warranty
* This device is for indoor installation only.
PACKAGE CONTENTS
PECMS01 Motion Sensor, CR2045 Battery, 2x Screws with Dowels, 3M Mounting
tape, Quick Start Guide, Warranty Card, Sticker.
INSTALLATION AND CONFIGURATION
1. Make sure that the Perenio® Gateway or IoT Router was pre-installed and
connected to the network through Wi-Fi/Ethernet.
NOTE. The Gateway or the IoT Router may be purchased as a standalone device or as
part of the Perenio® Smart Kit.
Doc Date: August 31, 2020
©Perenio IoT spol s r.o.
iOS (12.0 and higher), Android (5.1 and higher)
ZigBee HA 1.2 (Wireless connection distance: Up to 40 m),
battery operated (DC 3V, 600 mAh), wide detection area
(10x6 m at 110°), white color, mounting bracket, PIR
Sensor, LED indicator. Dimensions: 84.4 mm x 63.4 mm x
26.3 mm. Operating conditions: 0°C to +45°C, 10% to 85%
RH (non-condensing)
PIR Technology of motion detection, ultra-low power
consumption, removable panel, tool-free installation
2 years (Service life: 2 years)
Version: 2.1.1
All Rights Reserved
1