Advertisement
The labelling of the product may not be changed, removed or made unrecognizable.
Sensor states and state check
The sensor has four states: Initial, Joining, Configure and Operational state.
Remote reset (OTA)
or
Re-join
Re-join functionality
The device supervises its connectivity to the network, by monitoring that periodic downlink messages are
received.
The device tries to re-join the network if it has not heard anything from the network for 288 uplinks (~ 36 days).
Startup Sequence
When the device has joined the network, startup transmissions are performed to make it easier to configure
the device using downlink commands. When the startup sequence is completed normal operation is started.
RFM-LR1
INITIAL
Press button
for 3 sec
JOINING
Connected to
LoRaWAN network
CONFIGURE
Polled network
configuration commands
during 2 min
OPERATIONAL
2
User Manual v1.1
Advertisement
