Lens Chassis, Lens Frame (R) - Sony FDR-AX700 Service Manual

2019/01/18 06:14:17 (GMT+09:00)
4-2-20.

Lens Chassis, Lens Frame (R)

[ 3 ] Heat sink (T)
Refer to "Notes on Assembling the
Heat Sink (T)".
Note 1:
Note 2:
FDR-AX700
[ 4 ] Tape AS
(Note 1)
(Size 25 x 25 mm)
Refer to "Notes on
Assembling the Tape AS".
[ 6 ] four screws
#2 (M1.7 X 4.0)
(0.12 ± 0.02 N·m)
Use this to cut or splice so that it becomes the designated size.
Do not reuse the CM Radiation Sheet (915) because its adhesive
force decreases when it is removed once.
[ 2 ] screw
#2 (M1.7 X 4.0)
(0.12 ± 0.02 N·m)
[ 1 ] CM radiation sheet (915)
(Note 2)
Refer to "Notes on Assembling the CM Radiation Sheet (915)".
[ 7 ] two screws
#2 (M1.7 X 4.0)
(0.12 ± 0.02 N·m)
[ 8 ] Lens chassis
[ 5 ] three screws
#12 (M1.7 X 5.0)
(0.12 ± 0.02 N·m)
Sony CONFIDENTIAL
For Authorized Servicer
[ 8 ] Lens frame (R)
4-27
SYS SET