Table of Contents
Advertisement
4) SERVICE
a) Have your power tool serviced by a qualified repair person using only identical replacement
parts. This will ensure that the safety of the power tool is maintained.
ADDITIONAL SAFETY INFORMATION
To order parts and supplies: 800.343.9353 >> eastwood.com
• Never operate or store Impact Wrench in damp or wet conditions.
• Plug into a minimum 15 amp circuit. If using an extension cord, it must
be AWG 16 or greater, no longer than 25'.
• Dust and fine particles are generated while operating the Impact Wrench
which can contain hazardous or toxic substances. Breathing this dust can
cause many serious respiratory health conditions. Always use NIOSH ap-
proved respiratory protection while using this Impact Wrench. This Impact
Wrench can eject chips, particles and debris at high velocity during opera-
tion. Wear ANSI approved eye protection at all times while operating.
• The rotating drive and impact sockets can quickly catch loose clothing,
long hair or jewelry causing serious personal injury. Keep all loose clothing,
long hair and jewelry away from operating Impact Wrench.
• This Impact Wrench can quickly start up when handling while plugged
in to electrical supply causing serious personal injury. Always unplug the
tool from the electrical supply before changing sockets, accessories or
performing maintenance.
• Sharp metal fastener edges can cut. Always wear protective work gloves
while handling.
• Rotating Impact Wrench sockets, other accessories and fasteners can
quickly cause cuts. Keep hands and fingers away from sockets, other
accessories and fasteners.
• This Impact Wrench can quickly and violently kick back or twist while
operating causing severe hand and or wrist injury. Do not apply excessive
force to Impact Wrench while in use. Always operate Impact Wrench with
two hands.
• Damaged impact sockets and accessories can break at high torque levels
causing personal injury or property damage. If excessive vibration is felt,
discontinue use immediately and disconnect tool from electrical supply.
Inspect socket, accessory or Impact Wrench for damage. Do not resume
use until resolution is found.
SHOCK HAZARD!
HEALTH & INJURY HAZARDS!
5
Advertisement
Table of Contents
