Advertisement
Wiring
Refer to the wire diagram on page 2 for wiring the unit. Replace cover plate before supplying power to the unit.
Replacing the Bulb
1. To replace the bulb, loosen the Phillips screw to remove the outer ring holding the
lens.
2. Carefully remove the outer ring, glass lens and rubber seal.
3. Remove the old bulb from the unit.
4. Replace with 1000 watt BT56 lamp. See part# WAL-SB-1000W-MH to purchase
replacement bulb.
5. Replace the seal, glass lens and outer ring. Hand tight the outer ring until snug. Do not
over tighten.
1
2
Use the black wire on (120v) tap and white wire on (Common) tap for 120v AC connections or
the black wire on (208v) tap and white wire on (Common) tap for 208v AC connections or the
black wire on (240v) tap and white wire on (Common) tap for 240v AC connections or the
black wire on (277v) tap and white wire on (Common) tap for 277v AC connections
1
2
Larson Electronics, LLC
3
(277V) TAP
(240V) TAP
(208V) TAP
(120V) TAP
(COM) TAP
3
Phone: (800) 369-6671
4
N3R BALLAST BOX
4
Fax: (903) 498-3364
5
6
Title
HID-22-15M-SL-REM-30
Author
David Downs
File
ments\Tiny Cad Files\HID-22-15M-SL-REM-30.dsn
Revision
Date
1.0
03/03/2017
5
6
www.larsonelectronics.com
WAL-C-4XM
7
Document
Sheets
1 of 1
7
2 of 3
Advertisement
