Adding Categories - American Megatrends 780 Hardware Manual

Menu Screen,
Note:

Adding Categories

Continued
The other buttons located at the top of the screen are as
follows:
•
Exit – exits the program
•
Save Configuration – saves the configuration file. This
file is used to flash the SDK configuration to the
MegaRAC card.
•
Load Configuration – loads a previous configuration
that has already been created.
•
Import IPMI Info. – loads the IPMI information
created by the GetSDR utility.
•
Help – displays the Hardware Health SDK help file.
The Delete Category button is inactive in the screen shot
above. A category must be selected in the Health Tree to
make this button active. After a category has been selected,
you can then delete that function.
To add a category, click on a category or the Add Category
button. The following dialog box displays:
Enter the name of the health category and click OK. A
folder for the new category will display in the Health
Function Tree.
Using the MegaRAC Hardware Health Function
Cont'd
7