American Megatrends Enterprise-II User Manual page 24

Step 2 Install Memory,
SIMM Part Numbers
The following table lists suggested
manufacturers and part numbers.
Memory Type
1 MB x 9
4 MB x 9
Installing SIMMs
Both Bank 0 and Bank 1 have four SIMM
sockets. These sockets can be filled with
either 1 MB x 9 or 4 MB x 9 SIMMs. Use
only one type of module to fill each bank.
Place the 80486 Enterprise-II motherboard
on an anti-static mat. With the component
side of the SIMM facing you, firmly push
the card into the socket at a 45 degree
angle, then push it up to a vertical
position. When properly inserted, the SIMM
clicks into place as the latching pins
engage. See the following figure.
16
Continued
Manufacturer Part Number
Fujitsu® MB85235-70
Toshiba® THM91000AS-70
NEC® MC-42100A9-70
Siemens® HYM910005-70
OKI® MSC2340-70459
Toshiba THM94000S-80
NEC MC-85235-80
Chapter 2 - Installation