Advertisement
voltage on the device output. If in the operating mode the load resistance change will cause the
excess of the specified voltage limit, the device will automatically switch to the voltage
stabilization mode with setting on terminals «+» and «-» of the preset voltage value limit, and the
output current will proportionally fall.
3.
By using CURRENT rotary switch set the maximum allowable current value (current limit value)
for your load.
4.
Connect the load to the device and press LOAD button. OUTPUT indicator should become red.
5.
Before you disconnect the load press LOAD button. OUTPUT indicator will go out.
6.
Before switching off the device, disconnect the load.
5.1. Software overview
The standard package of the device includes AKTAKOM Power Manager (APM) software. AKTAKOM
Power Manager (APM) Software offers wide opportunities for controlling the output voltage and
stabilization current both in arbitrary (manual) and in functional modes. Functional control is a powerful
APM software tool which allows you not only to automatically control the device via your computer but
also to program it for the off-line mode operation in accordance with the predetermined algorithm.
Functional control mode in APM software allows you to automatically control the output parameters
(voltage or current) of the power supply according to the law set by the graphical and tabular editors. In
the convenient graphical editor user may set 10 standard forms of parameter changes (including: sine,
square, triangle, saw, flash, pulse, 2 types of exponent, 2 types of S-curves) as well as any arbitrary
shape which can be described with a formula.
1.
The software has no physical media (CD) and can be downloaded at
registering the equipment with a serial number. Therefore follow Product registration link on
www.tmatlantic.com.
2.
PC installation of AKTAKOM Power Manager Software is instructed on
www.aktakom.com.
3.
Please note! When you run AKTAKOM Power Manager Software for the first time it will require
an access key. This key can be received (copied) at
registration. The key can be entered later, see Settings/Pass key menu.
5.2. PC connection
Connection to the PC is made via USB or LAN located on the rear panel of APS-3103L. The first
connection to your PC should be made via USB interface. This will help to install the network
parameters of your local network for the connection to the device. Installation instruction for the network
parameters is given in HELP file.
1.
For the device automatic search and connection it is not recommended to run AKTAKOM Power
Manager Software after the PC installation but at first to connect the USB cable of APS-3103L to
the PC and then to run the program agreeing with the device automatic search. You may connect
the device to the PC manually, see HELP file.
2.
Please note! When you run AKTAKOM Power Manager Software for the first time it will require
an access key. This key can be received (copied) at
registration. The key can be entered later, see Settings/Pass key menu. If you do not enter the key
after you run the software this program will operate in demo-mode.
3.
State (status) of the device remote control is indicated on the front panel with the connection
indicator:
a. in the manual control mode — the indicator is OFF;
b. USB cable is connected (operation via USB) — the indicator is red;
c. LAN cable is connected (USB cable is disconnected) — the indicator is green;
d. there is "connected" mode set in the program (the device is operating in the remote control
mode, the manual control is OFF) — the indicator is blinking in green or red color.
4.
After interface connection, the network cable connection and active work of the local network the
indicators of LAN socket should be blinking. Note: when you operate via LAN you need to
DISCONNECT the USB cable.
5.
USB interface takes priority. After you connect the USB cable the device can be controlled via the
PC and the program connected via USB.
6
5. SOFTWARE
www.tmatlantic.com
www.tmatlantic.com
www.tmatlantic.com
www.tmatlantic.com
after
www.tmatlantic.com
after APS-3103L
after APS-3103L
and
Advertisement
