Fm Radio Operation - auna Microstar Sing Manual

FM RADIO OPERATION

AUTO Scan (SCAN)
You can use the scan (auto tune) function to automatically scan for new
digital radio stations and remove inactive ones.
1. Press hold the PLAY/SCAN Button for 2 seconds the on main unit or
remote control SCAN button to choose "P-xx". The number of stations
found will be displayed during the auto tune. When the auto tune has
finished, will tune to the last station that you were listening to. If the last
station you were listening to is no longer available, will tune into the first
station in the alphabetical list.
2. To manually tune to a specific radio station, tap the  or  Button on
either main unit or remote control repeatedly.
RECALLING PRESET MEMORY CHANNELS
In radio mode, recall the pre-set channels by pressing the PRESET+ or -
Button on remote control repeatedly. (Note:"P01" will blink in the display if
you are programming preset for first time)
Note
FM search and listening LED have no frequency display.
EN
51