Using the Quick and Easy Setup Wizard
If the storage has not been configured on your StorTrends® iTX Storage Appliance, you
will be prompted to run the Wizard. The Quick and Easy Setup Wizard will get your
StorTrends® iTX Storage Appliance up and running in less than five minutes.
If you would like more control of these settings, you can enter the
Advanced Setup Wizard. Jump to the next section for more information on
the Advanced Setup Wizard.
Use the following instructions as a basis.
Note:
The Quick and Easy Setup Wizard will select all the physical hard disk drives present in
the StorTrends® iTX Storage Appliance to create the RAID array. SAN and NAS
volume names are automatically generated. A default NAS Share is also automatically
created. The SAN and NAS Volumes will be using Exact Provisioning in the Quick and
Easy Setup Wizard. Twenty percent of the physically available hard disk space should be
reserved if you are planning to use snapshot storage.
STOP!
StorTrends® 1100 Set Up Guide
11