Table of Contents
Advertisement
Quick Links
splash-and-splashcenter-manual-en
Splash / Splash-Center + XL-Versions
Etching machine
Translation of the original instructions
Content
General.......................................................2
Technical Data............................................3
EG-Declaration of Conformity.....................4
Intended Use..............................................5
Safety Instructions......................................5
Short instructions........................................6
Composition................................................7
Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck - Germany
Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de
Page 1 / 19
Setup..........................................................8
Operation..................................................11
Maintenance/Cleaning..............................14
Spare part list...........................................15
Guarantee.................................................19
Disclaimer of Warranty.............................19
Copyright..................................................19
Advertisement
Table of Contents
Related Manuals for Bungard Splash
Summary of Contents for Bungard Splash
-
Page 1: Table Of Contents
Safety Instructions........5 Guarantee..........19 Short instructions........6 Disclaimer of Warranty......19 Composition..........7 Copyright..........19 Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de... -
Page 2: General
- add anti foam if necessary). Alkaline resist stripping. • In the Splash Center all wet process steps of photo positive pcb production can be processed in • a single machine, without having to carry the dripping board to the next machine. In the spray chamber the pcb is etched, tank 1 and 2 include a cascade rinsing, tank 3 is used for alkaline developing and in tank 4 the etched circuit board can be tinned. -
Page 3: Technical Data
15 L e.g. f. chem. tinning Splash /Splash XL only Spray Chamber + Static Rinse Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de... -
Page 4: Eg-Declaration Of Conformity
Maschinenrichtlinie / Machinery Directive 2006/42/EG/37/EG – Windeck, 10.1.2021 Jürgen Bungard Geschäftsführer Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de... -
Page 5: Intended Use
- risk of damage by negative pressure. Environmental protection Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de... -
Page 6: Short Instructions
In operation, the switch lights and the heating element changes to an orange-red color. Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de... -
Page 7: Composition
At the right side of the machine is the rinsing zone. Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de... - Page 8 If you want to completely empty the tanks, just pull up the pipes with a plier. Splash-Center: The machine is supplied with a safety catch pan. This tub is so dimensioned that it can take up the entire liquid in the accident.
-
Page 9: Setup
30 seconds two or three times. The pump may not dry run for longer time. Fill the static rinse of the Splash so far with water that a plate, which is immersed with the plate holder, dives in completely. - Page 10 (up to 200g / l) fumes, complex salts, crystallization risk Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de...
-
Page 11: Operation
Pressing the Enter key the machine starts. Pressing the arrow key you can enter a new time value. Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de... - Page 12 Then set the desired temperature with the 45 °C arrow keys and press Enter. Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de...
- Page 13 10, so the water going through the overflow is purified by a factor of 1000. Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de...
-
Page 14: Maintenance/Cleaning
Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de... -
Page 15: Spare Part List
Kugelhahn DN25 f. Ätzmaschine cog valve DN25 f. etching machines Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de... - Page 16 6000 Frontplatte Jet, Splash, DL Front panel Jet, Splash, DL Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de...
- Page 17 (außen) ca. 8 kg, ca. mx670mmx125mm, about 8 56 L kg, approx. 56 L Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de...
- Page 18 Deckel Tank 3+4 Lid tank 3+ 6000 Abquetschtrockner Squeeze off dryer Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de...
-
Page 19: Guarantee
Copyright © 2021 Bungard Elektronik GmbH & Co. KG Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de...
Need help?
Do you have a question about the Splash and is the answer not in the manual?
Questions and answers