Install The Driver - Xencelabs Pen Tablet Medium Bundle Quick Start Manual

Download Drivers
The tablet will work without the driver but only has basic navigation functions,
however, the Quick Keys™ requires driver installation. To get full benefits of the
tablet we strongly recommend you download and install the driver.
See xencelabs.com/support/download-drivers page on the Xencelabs website to
download the latest Windows, Mac and Linux drivers. After the driver is installed
follow instructions provided.
Important note: The installation wizard requires wired connection to at least
one of your devices during setup.
For Mac users, after installing the driver please restart your Mac for the driver
to function properly
IMPORTANT NOTE FOR WACOM USERS
If, in addition to your Xencelabs device, you also use a Wacom pen display or
pen tablet, please note:
For applications using Windows Ink (typically the default), you should be
able to use both devices without issues.
If your applications require the use of Wintab, you must:
Exit the application you want to use.
Disconnect the USB port (or wireless adapter) of either the
Wacom or Xencelabs device. This is because Wintab can only
work with one device at a time.
Restart the application so it can find the device you want to use.
If you do not know if your application requires Wintab, please check with
the software company. You can also just try using the application, but you
may see random pen behavior if there are Wintab conflicts.
10