Connect Tablet - Xencelabs Pen Tablet Medium Bundle Quick Start Manual

Connecting the Tablet and/or Quick Keys
You should connect the tablet before trying to install the driver via wired USB. If you
have the Pen Tablet Bundle, you should also connect the Quick Keys™ before installing
the driver. Note you can use the tablet with a USB wired connection or wirelessly. To use
with a USB connection or to charge the tablet and/or Quick Keys™, connect the provided
USB cable to the devices and to a USB-A port on a computer. Connect the cable to a
powered USB hub. Make sure your computer is powered on. (Figure 1+2)
Fig. 1
Fig. 2
Power indicator
Solid Amber - Low
Breathing Green - Charging
Solid Green - Charged
Solid Amber - Low
Breathing Green - Charging
Solid Green - Charged
™
7