Advertisement
4. assembly
4.1.
Attach the handles (parts 2&3) using the supplied screws (part 4) cover
the ends of the screws by using part 5.
4.2.
Slot the hooks into place using the perforations on the workstation as
shown in fig.1.
5. operation
warninG! only open one drawer at a time and Do not overload the drawers, fig.2 shows the maximum weight per drawer size.
‰
5.1.
When moving the rollcab, ensure that the drawers are closed and locked to prevent accidental opening. Release the brakes as
shown in fig.5 and move the rollcab using the handles to maintain full control. When the rollcab has been moved to the required
location, lock the brakes (fig.5).
warninG! Do not move across slopes of more than 5° as the rollcab may tilt over (fig.4).
‰
Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to
environment proteCtion
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important: no liability is accepted for incorrect use of this product.
warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
sealey Group, kempson way, suffolk business park, bury st edmunds, suffolk. ip32 7ar
01284 757500
© Jack Sealey limited
fig.2
www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500
01284 703534
Original Language Version
fig.1
fig.3
sales@sealey.co.uk
AP36MWS AP45MWS Issue 1 29/07/19
fig.4
fig.5
www.sealey.co.uk
Advertisement
