Sony SRS-XB13 Help Manual page 15

To pair the speaker with a second or subsequent BLUETOOTH device (when the speaker has pairing
information of other BLUETOOTH devices), proceed to step
To reconnect to the BLUETOOTH device that has been registered (paired), proceed to step
will automatically be connected just by turning on the BLUETOOTH function on the BLUETOOTH device.
Depending on the BLUETOOTH device, it may be reconnected just by turning on the power to the speaker. For
details, refer to the operating instructions supplied with the BLUETOOTH device.
When the indicator stays lit
The speaker has been connected to the BLUETOOTH device.
To connect to other BLUETOOTH devices, follow one of the procedures below.
To pair the speaker with a second or subsequent BLUETOOTH device (when the speaker has pairing
information of other BLUETOOTH devices), proceed to step
To reconnect to the BLUETOOTH device that has been registered (paired), proceed to step
will automatically be connected just by turning on the BLUETOOTH function on the BLUETOOTH device.
Press the (BLUETOOTH) button.
3
You hear a beep from the speaker and the (BLUETOOTH) indicator starts double flashing (pairing mode).
Perform the pairing procedure on the BLUETOOTH device to detect the speaker.
4
When a list of detected devices appears on the display of the BLUETOOTH device, select "SRS-XB13."
*
If a passkey is required on the display of the BLUETOOTH device, enter "0000."
*
The passkey may be called a "passcode," "PIN code," "PIN number," or "password."
Make the BLUETOOTH connection from the BLUETOOTH device.
5
When the BLUETOOTH connection is established, you hear a beep from the speaker and the activity of the
(BLUETOOTH) indicator changes from flashing to lit.
If the BLUETOOTH connection is not established, repeat from step
.
.
.
15
. The speaker
. The speaker