Sony SRS-XB13 Help Manual page 14

Help Guide
Wireless Speaker
SRS-XB13
Pairing and connecting with BLUETOOTH
Pairing is the process required to mutually register the information on BLUETOOTH devices to be connected wirelessly.
To pair with a second or subsequent BLUETOOTH device, perform the following pairing procedure for each device.
Before operating the speaker, be sure to do the following:
Place the BLUETOOTH device within 1 m (3.2 ft) of the speaker.
Connect the speaker to an AC outlet via a USB AC adaptor (commercially available). Or charge the built-in battery
sufficiently.
To avoid any sudden loud sound output from the speaker, turn down the volume of both the BLUETOOTH device and
the speaker or stop music playback.
Depending on the BLUETOOTH device, the volume of the device may be synchronized with the speaker.
Prepare the operating instructions supplied with the BLUETOOTH device for reference.
Turn on the speaker.
1
Check the status of the (BLUETOOTH) indicator.
2
When the indicator is double flashing
After you pair the speaker with a BLUETOOTH device for the first time since purchase or initialize the speaker (the
speaker has no pairing information), the speaker automatically enters pairing mode when it is turned on. Proceed to
step .
When the indicator is flashing slowly
The speaker is searching for a BLUETOOTH device.
®
devices
14