Advertisement
LCD Menu
Define Sequence
Setup View
Record Pattern
Alarm Actions
Config Devices
Reset Dome
Select Language
Tog Primary / 2nd
Tog Zoom / Focus
Adjust V-Phase
Show Sys Info
Ping Dome / TTR
Adj Backlighting
Adj Keyclick Vol
Keyclick ON/OFF
Press the Menu button on the keypad to invoke the
menu. This scrollable menu appears on the LCD. Only
two menu selections are visible at one time on the LCD.
Move the Tracker Ball up and down to scroll through the
menu selections. To select the item on the top line of the
LCD (in this example Define Sequence), press a Zoom
button. To select the item on the bottom line of the LCD
(in this example Setup View) press a Focus button.
Apple Peel
The "Apple Peel" consists of three revolutions of camera
panning, with tilt starting at the ceiling line. Each
revolution tilts down approximately 30°. The Apple Peel
will provide you with a complete view of the area.
APPLE PEEL PATTERN
2
QUICK REFERENCE GUIDE
Select a Camera
Press the number of the camera whose video you want
to display full-screen, then press
button).
Sequence through the
Cameras
To display all of the available cameras—one at a time—
in sequential order, press the Previous and Next
buttons. Each time you press Previous, the previous
camera is displayed. Each time you press Next, the next
camera is displayed.
Select the Monitor Display
Format
If you are connected to a quad splitter or multiplexer, you
can specify the monitor display format:
• Full-screen
• 2X2 (for quad splitters and 4, 9, and 16-camera
multiplexers)
• 3X3 (for 9 and 16-camera multiplexers)
• 4X4 (for 16-camera multiplexers)
Press
(Display button) to sequence through the
available display formats. For quad splitters, the Display
button switches between Quad A (cameras 1-4) and
Quad B (cameras 5-8).
"Flip" the SpeedDome
To flip the currently selected SpeedDome 180° in the
opposite direction, press Flip.
Run "Apple Peel"
To instruct the currently selected SpeedDome to run the
Apple Peel pattern, press Peel.
The Apple Peel pattern will repeat itself indefinitely until
you issue a camera command (pan, tilt, zoom or focus)
to the dome running the pattern.
RCTT16BE / VM16 PLUS ENHANCED TOUCH TRACKER
(Camera
8000-2654-01, REV. A1
Advertisement
