Advertisement
Quick Links
Download this manual
See also:
Installation Manual
USER'S QUICK GUIDE
Invokes the menu.
Clears the last keypad entry
or active alarm.
Opens or closes the camera's iris,
making the picture on the monitor
appear darker or lighter.
Calls up video from a specific
camera.
Controls the camera's zoom function.
Can be swapped with focus.
Controls the camera's pan and tilt function.
Also allows you to interface with the menu.
Menu
Calibration
Define Sequence
Setup View
Record Pattern
Alarm Actions
Config Devices
Reset Dome
Select Language
Tog Primary / 2nd
Tog Zoom / Focus
Adjust V-Phase
Show Sys Info
Ping Dome / TTR
8000-1011-01, Rev. E
Displays the Dome's ID Code.
Toggles the state of the
dome's output.
Press the Menu button on the keypad to
invoke the menu. This scrollable menu is
displayed on the LCD. Only two menu
selections are visible at one time on the
LCD.
Move the Tracker Ball up and down to
scroll through the menu selections. To
select the item on the top line of the LCD
(in this example Define Sequence), press
the button on the left side of the Touch
Tracker. To select the item on the bottom
line of the LCD (in this example Setup
View) press the button on the right side of
the Touch Tracker.
View Manager 16 Plus
Initiates the currently selected
SpeedDome's Apple Peel
pattern.
Sequences through the available
monitor display modes: 2x2, 3x3,
4x4, and full-screen.
Controls the camera's focus function.
Can be swapped with zoom.
The "Apple Peel" is comprised of three
revolutions of camera panning, with tilt
starting at the ceiling line. Each revolution
tilts down approximately 30°. The Apple
Peel will provide you with a complete view
of the area.
Displays currently selected
camera number, Quick View
number or Pattern number.
Also displays system prompts
and messages.
Flips the currently
selected SpeedDome
180° .
Calls up a Quick View.
Calls up a Pattern one time.
Repeats a Pattern indefinitely.
Initiates the Sequence.
Enables you to step through
the installed cameras—one at a
time—in sequential order.
Apple Peel
APPLE PEEL PATTERN
CCTV PRODUCTS
Advertisement
Related Manuals for American Dynamics VM16 Plus
Summary of Contents for American Dynamics VM16 Plus
- Page 1 USER'S QUICK GUIDE Toggles the state of the dome's output. Invokes the menu. Clears the last keypad entry or active alarm. Opens or closes the camera's iris, making the picture on the monitor appear darker or lighter. Calls up video from a specific camera.
- Page 2 Select a Camera Press the number of the camera whose video you want to display full-screen, then press Camera. Sequence through the Cameras To display all of the available cameras—one at a time—in sequential order, press the Previous and Next buttons. Each time you press Previous, the previous camera is displayed.