Toto SW3056AT40 Instruction Manual page 20

Maintenance
{SW3056AT40, SW3046AT40, SW3054AT40, SW3044AT40}
Gap between the Main Unit and Bowl Unit
You can remove the main unit to clean
the top of the bowl unit and the bottom of
the main unit.
Unplug the power plug.
1
Remove the main unit.
2
Do not pull the unit with undue force (because the water supply hose and power cord are attached).
(1) Pull the main unit toward you while pressing
the "Main unit removal button".
Top of the bowl unit
3 Clean the top of the bowl unit and the bottom of the main unit.
Wipe with a soft cloth soaked in a diluted, neutral kitchen detergent. Then, wipe it with a soft cloth soaked
in water so that no detergent remains.
Mount the main unit.
4
(1) Lift the main unit, then lower it straight down while threading the
power cord and water supply hose into the recess on the bowl unit.
• B e c r a f e l u n t o o t p n i c h h t e p o w r e
• D o n t o e c x e s s v i e y l b e n d h t e w t a r e
(2) Align the main unit with the center of the base
plate and press it rmly onto the base plate until a
click sound is heard
CAUTION
Push the main unit rmly on to the
base plate until a click sound is heard.
(Failure to do so could cause the main unit
to come loose and fall resulting in injury.)
After mounting, check that the main unit
does not detach even when pulled.
Insert the power plug.
5
The "Power" LED lights up.
38
Gap between the Main Unit and Bowl Unit
(Approximately once a month)
Soft cloth soaked in water Toilet paper, etc. (May cause damage.)
(2) Lift up the main unit.
• D o n t o e c x e s s v i e y l b e n d h t e w t a r e
Base plate
Bolt
Main unit
removal button
c r o . d
s u p p y l h o s . e
Base plate
{SW3056, SW3046, SW3054, SW3044}
Gap between the Main Unit and Bowl Unit
You can remove the main unit to clean
the top of the bowl unit and the bottom of
the main unit.
1 Unplug the power plug.
Remove the main unit.
2
Do not pull the unit with undue force
(because the water supply hose and
power cord are attached).
s u p p y l h o s . e
Clean the top of the bowl unit and the bottom of the main unit.
3
Wipe with a soft cloth soaked in a diluted, neutral kitchen detergent. Then, wipe it with a soft cloth soaked
in water so that no detergent remains.
Mount the main unit.
4
Be careful not to pinch the cords between the main unit and the base plate.
Click
After mounting, check that the main unit
does not detach even when pulled.
Insert the power plug.
5
The "Power" LED lights up.
Soft cloth soaked in water
Top of the bowl unit
Pull the main unit toward you
while pressing the "Main unit
removal button".
Base plate
CAUTION
Push the main unit rmly on to the
base plate until a click sound is heard.
(Failure to do so could cause the main unit
to come loose and fall resulting in injury.)
(Approximately once a month)
Toilet paper, etc. (May cause damage.)
Base plate
Bolt
Main unit
removal button
Click
Align the main
unit with the
center of the
base plate and
press it rmly
onto the base
plate until a click
sound is heard.
39