Indicator - Toto SW3056AT40 Instruction Manual

Automatic Functions
*1
"EWATER+" is used As you
automatically to clean the
approach
wand and bowl unit.
• Operation under the initial
settings is described
below.
Removing odors inside the
bowl unit
Deodorizer
Cleans the wand with
*1
"EWATER+"
Auto wand
CLEAN
Pre-mist
Cleans the bowl unit with
A mist is
*1
"EWATER+" sprayed inside
the bowl unit
Auto bowl
to make it
more dif cult
CLEAN
for dirt to
adhere
Bowl light
CLEAN

indicator

(Lights up)
24
Cleaning Features
As you As you
sit * stand up
2
Starts the auto power
deodorizer
(After about 10 seconds)
It stops after about 60
Starts the deodorizer seconds
Cleans the wand
automatically
(After about 25 seconds)
Only when the cleansing
functions are used.
The wand extends and
"EWATER+"
from the base of the wand
After-mist
(After auto wand CLEAN)
If the cleansing functions
are not used, after-mist
starts after about 25
seconds.
"EWATER+"
sprayed on the bowl
unit
Lights up
Lights up during
during
auto wand CLEAN
pre-mist
and after-mist
(Lights up in a cycle)
Lights to show that the "CLEAN" functions are operating.
Note
Deodorizing lter needs regular
maintenance. (Page 36)
When the cleansing functions (Rear
and Front cleansing etc,) have not
been used in 8 hours, the wand is
cleaned automatically.
(Water comes out from around the
wand.)
*1 comes out
The pre-mist and after-mist are not
sprayed if the toilet seat is open.
The pre-mist does not work for about
90 seconds after the after-mist has
nished.
When the cleansing feature (Rear and
*1 mist is Front cleansing etc,) is not used for
about 8 hours, mist is sprayed on the
bowl unit automatically.
Lights up continuously or in a cycle
when "Auto wand CLEAN", "Auto bowl
CLEAN" or "Auto power deodorizer" is
operating.
(Lights only when the toilet seat is not
in-use)
Bowl light CLEAN indicator
Lights to show that auto bowl CLEAN Lights to show that the "clean"
and auto wand CLEAN are operating. functions are operating.
C h a n g n i g
"EWATER+" can also be used by
pressing the remote control button
settings
For wand
"Deodorizer" ON/OFF
"Auto power deodorizer"
CLEAN" button
ON/OFF
(After wand cleaning, water comes out
(Page 52 for all)
from around the wand.)
●To clean the wand with it extended.
"Wand cleaning" (Page 37)
For bowl unit ( ［ MANUAL CLEAN］ )
"Auto wand CLEAN"
1
ON/OFF
(Page 50)
2
3
"Auto bowl CLEAN"
ON/OFF
(Page 50)
("EWATER+" mist is sprayed on the bowl unit)
Note
It cannot be used when the wand is out
or when you are sitting on the toilet seat.
"Bowl light" ON/OFF
(Page 54)
*1 What is meant by "EWATER+" ?
"EWATER+" helps the self-cleaning wand
feature working effectively and preventing the
dirt accumulation causing the stains.
● "EWATER+" is generated from potable water.
● "EWATER+" helps to minimize dirty surfaces,
but does not make cleaning unnecessary.
● The effect and duration vary depending on
"CLEAN indicator"
the usage environment and conditions.
ON/OFF
(Page 54)
*2 Water comes out from the area around the wand
for several seconds while water is warmed up.
Press "Wand
Press.
Select [MANUAL CLEANING].
Press.
Select [MANUAL CLEAN].
Press.
25