Advertisement
8
model no. 040-1198-8
LOADING BICYCLES ON THE BIKE CARRIER
Place the bicycles
in an alternating direction
7
on the bike carrier in such a way that the
wheels of the bicycle rest on the wheel
trays .
Note: Load the heaviest bicycle closest to the
vehicle.
8
Push down the rack arm of the centre mast
onto the top tube of the bicycle until the rack
arm is firmly locked in its position.
Note: Press the button provided at the centre
mast, and lift to release the locking of the rack
arm, while unloading the bicycle.
CAUTION:
Position the bicycle pedal in such a way to prevent the vehicle from being
•
scratched.
Do not allow the bicycle tires to hang near the exhaust pipe of vehicle.
•
The hot exhaust could melt and destroy the tires.
Check for tightness of the straps at regular intervals, as the straps may loosen
•
and bicycles may shift during travel. Inspect more frequently when travelling
on bumpy roads.
Remove the bike carrier from the vehicle when not in use to avoid
•
additional wear on both the vehicle and the carrier.
9
Secure the bicycle wheels with the left and right
wheel trays using velcro straps (W).
10
TILTING THE BIKE CARRIER
Note: The bike carrier can be tilted for easy access to the rear trunk/hatch of the vehicle and to prevent damage of the
carrier or vehicle while opening the trunk lid of the vehicle.
Ensure that the bike carrier is not loaded with
10
bicycles. Hold the center masts and pull
upwards on the quick-release handles (X) at
the base of the masts.
W
W
X
9
Advertisement
