Related Manuals for Rennsteig PEW15
Summary of Contents for Rennsteig PEW15
- Page 1 Owner‘s Manual Hand Crimping Tool PEW15 Owner‘s Manual Hand Crimping Tool PEW15 Please read this manual carefully before starting any job! Rev.: 2017-08-14 1 / 6...
-
Page 2: Table Of Contents
Owner‘s Manual Hand Crimping Tool PEW15 Table of Contents General Information Intended Use Description Functional Operation / Crimping Process Exchange of Crimping Die Sets Emergency Release of Forced Lock Setting the Crimp Height Warranty Maintenance and Service Rennsteig Werkzeuge An der Koppel 1 98547 Viernau/Thüringen, Germany... -
Page 3: General Information
Owner‘s Manual Hand Crimping Tool PEW15 1. General Information The Hand Crimping Tool PEW15 is manufactured by using the latest technology and the generally accepted safety regulations. The tool may only be used in proper working condition with all safety and hazard regulations in mind and should only be used for the purpose for which it is intended for and described in this manual. -
Page 4: Functional Operation / Crimping Process
Fig. 2 5. Exchange of Crimping Dies The crimping dies of Hand Crimping Tool PEW15 can be exchanged depending on the application and is done as follows: 1. Remove locator by loosening the fastening nut with a wrench SW8 (Schlüsselweite= Wrench Size). -
Page 5: Emergency Release Of Forced Lock
Owner‘s Manual Hand Crimping Tool PEW15 6. Emergency Release of Forced Lock The forced lock will open automatically after the crimping process is completed. In order to avoid any damage to the crimping dies or the connector, the tool may be opened prematurely through the emergency release feature before a crimping error can occur. -
Page 6: Warranty
Adjustment Disk Fig. 4 8. Warranty RENNSTEIG- Products are thoroughly checked by the Quality Control Department. The general terms and conditions apply. 9. Maintenance and Service The Hand Crimping Tool must be in clean and proper working conditions prior to usage. Crimping residue needs to be removed.