American Dynamics DigiMux DG4004 Quick Setup Manual page 18

Quick Setup Guide
• To change the cameras in a PIP view:
-- Press SET,
-- Press the Camera for the full view display,
-- Press the Camera for the small display,
-- Press SET to end the assignment.
• Assign a camera to a specific window.
-- Press SET,
-- Move the cursor to the selected window with Direction keys,
-- Press Camera to assign the camera to the window,
-- Press SET to end the assignment.
6. Active Window
One window is assigned as the Active Window. This window is displayed in
real time. To assign the active window:
• Press SET.
• Press Direction keys to position the cursor over the desired window.
• Press SET to select the window and exit the selection mode.
10 Quick Setup Guide