Recording From The Radio; Specifications - Sharp QT-CD121H Operation Manual

<P=002>

Recording from the radio

1
● Tune in to the
FUNCTION
STAND-BY
To erase a recorded tape:
1. Set the FUNCTION switch to TAPE.
2. Load the tape to be erased into the cassette
3. Press the RECORD button.

SPECIFICATIONS

SHARP reserves the right to make design and specification changes for product improvement without prior
notice.
● General
Power source: AC 230 - 240 V, 50 Hz
Power
consumption: 11 W
Output power: MPO (Max.); 8.4 W (4.2 W + 4.2 W)
Speakers:
Output
terminal:
Dimensions:
Weight:
● Radio
Frequency
range:
Downloaded from: http://www.usersmanualguide.com/
2
Set the
Load a blank cas-
F U N C T I O N
sette into the cas-
switch to AM
sette compartment.
or FM AUTO.
station to be re-
STOP/EJECT
corded.
FM
TAPE CD
AM
AUTO
ON
compartment.
DC 12 V ["D" size (UM/SUM-1, R20
or HP-2) battery × 8]
(AC operation)
RMS; 4.6 W (2.3 W + 2.3 W)
(DC operation, 10 % T.H.D.)
10 cm (4") full-range speaker x 2
Tweeter × 2
Headphones; 16-50 ohms
(recommended; 32 ohms)
Width; 480 mm (18-15/16")
Height; 153 mm (6-1/16")
Depth; 254 mm (10")
3.2 kg (7.1 lbs.) without batteries
FM; 87.5 - 108 MHz
AM; 526.5 - 1,606.5 kHz
3
Press the
PAUSE
button.
PAUSE
● Tape recorder
Frequency
response:
Signal/noise
ratio:
Wow and
flutter:
Motor:
Bias system:
Erase system: Magnet erase
● Compact disc player
Type:
Signal
readout:
Audio
channels:
Quantization:
Filter:
D/A converter: 1-bit D/A converter
Wow and
flutter:
8
QT-CD121H(SUK) TINSE0004SJZZ
4 5
P r e ss the
Press the
PAUSE but-
RECORD
ton again.
button.
PAUSE
RECORD
50 - 14,000 Hz (Normal tape)
50 dB
0.25 % (WRMS)
DC 12 V electric governor
AC bias
Compact disc
Non-contact, 3-beam semi-
conductor laser pickup
2
16-bit linear quantization
4-times oversampling digital filter
Unmeasurable
(less than 0.001% W. peak)