Table of Contents
Advertisement
INSTRUCTIONS AND MAINTENANCE MANUAL
MAC R MOTORS
4.3 Transport
The machine must be transported always in accordance with the following instructions:
WARNING
Transport and lifting of the machine by the eyebolts only
For the correct handling of the motor, eyebolts must be used and must be inserted in the threaded holes on the
sides of the housing, which have been machined exclusively for said purpose. With motors with a shaft height of
160, an eyebolt may also be inserted at the top of the motor. Therefore, do not lift the motor using the shaft or
the fan casing under any circumstances.
To lift the machine, use guide devices (cables, chains or slings) with safety hooks on the ends. See diagram:
The lifting apparatus and guide devices must have sufficient load capacity to lift the machine. Please see that
technical data sheet for the motor to know how much each model weighs.
Sudden movements and knocks must be avoided during transport.
CODE: CTT12 EDITION: 01 DATE: MAY 2013
Subject to technical changes without prior notice
Figure 7: Transport and lifting of the motor
PAGE: 33
Advertisement
Table of Contents
