American Dynamics ADTT16 User Quick Manual page 2

Select a Camera
Press the number of the camera whose video
you want to display full-screen, then press
Camera.
Sequence through
the Cameras
To display all of the available cameras—one at
a time—in sequential order, press the Previous
and Next buttons. Each time you press
Previous, the previous camera is displayed.
Each time you press Next, the next camera is
displayed.
"Flip" the
SpeedDome
To flip the currently selected SpeedDome 180°
in the opposite direction, press Flip.
Run "Apple Peel"
To instruct the currently selected SpeedDome
to run the Apple Peel pattern, press Peel.
The Apple Peel pattern will repeat itself
indefinitely until you issue a camera command
(pan, tilt, zoom or focus) to the dome running
the pattern.
Clear an Alarm
To clear the alarm whose information appears
on the LCD press Clear.
Control Dome
Outputs
1. Refer to the Dome Input / Output chart to
see which outputs are connected to which
domes, and what the on / off states are for
those domes.
2. Press the number of the camera whose
output you want to turn on or off, then press
Camera.
3. Press the number of the output (1 - 4) that
you want to turn on or off.
4. Press Output On to turn the Output on; press
Output Off to turn the Output off.
USER'S QUICK GUIDE
Select the Monitor
Display Format
If you are connected to a quad splitter or
multiplexer, you can specify the monitor display
format:
full-screen
2X2 (for quad splitters and 4, 9, and 16-
camera multiplexers)
3X3 (for 9 and 16-camera multiplexers)
4X4 (for 16-camera multiplexers)
Press Display to sequence through the available
display formats. For quad splitters, the Display
button switches between Quad A (cameras 1-4)
and Quad B (cameras 5-8).
Display a Quick
View
Note: SpeedDome Ultra III supports 96 views.
Other domes support 4 views.
1. Press the number of the camera whose
Quick View you want to display, then press
Camera.
2. Press the number of the Quick View you
want to display (1 - 96), and then press
View.
Define a Quick
View
Note: SpeedDome Ultra III supports 96 views.
Other domes support 4 views.
1. On the monitor, display the picture for
which you want to create a quick view.
2. Press Menu.
3. Select .+'02-3$+4H
4. Press the number buttons (1 - 96) that you
want to assign to this Quick View.
5. Press Zoom or Focus to save.
Run a Pattern
1. Press the number of the camera whose
Pattern you want to display, then press
Camera.
2. Press the number of the Pattern you want
to display (1 - 3), then press Pattern (if you
want the pattern to run one time only) or
Repeat Pattern (if you want the Pattern to
repeat itself indefinitely).
If you select a repeating Pattern, the Pattern
will repeat itself until you issue a camera
command (pan, tilt zoom or focus) to the dome
running the Pattern.
AD T T
OUCH RACKER
User's Quick Guide
Define a Pattern
1. On the monitor, display the picture that you
want to be the starting point of the Pattern.
2. Press Menu and select 5+1(&6-7"''+&).
3. Press the number (1 - 3) that you want to
assign to this pattern.
4. Move the camera around, zoom and focus
as necessary to create a logical camera
pattern.
If you make a mistake during programming
and no longer want to program the pattern,
press Clear.
5. When you complete creating the pattern,
press Next.
SpeedDome LT Auto
Pan Programming
1. On the monitor, display the picture that you
want to be the starting point of the Auto
Pan.
2. Press Menu and select 5+1(&6-7"''+&).
3. Press the number 1 on the keypad.
4. Move the camera to the end point, then
press Next.
When you select Pattern 1 for this dome, the
camera will pan smoothly from side-to-side until
another camera command is issued.
Run the Sequence
To initiate the pre-defined Sequence, press Seq.
The Sequence will repeat itself indefinitely until
you press Seq or Clear.
Define the
Sequence
1. Press Menu. Select-*+,$)+-.+/0+)1+H
2. Use the Tracker Ball to scroll through the
list of events until the event you want to
define or re-define appears on the LCD.
3. In the !"9 field, indicate which camera this
event was defined on (use the number
buttons).
4. In the 81' field, indicate the kind of Action
you are specifying for this event. Press View
for a Quick View; press Pattern for a
Pattern. For a fixed shot, press Clear to
leave this field blank.
5. If the action is a Quick View or Pattern,
enter the specific Quick View or Pattern
number (use the number buttons).
6. In the *0&-field, indicate the duration time
for this event (use the number buttons).
7. Repeat steps 2 through 6 for each event to
be defined in the sequence.
8000-1011-02, Rev. B1
16