Alarm Search - American Dynamics ADR8045X Instruction Manual

ALARM SEARCH

With the alarm search function, it is possible to search for
alarm that has been recorded on the tape.
Search Operation
Press the STOP button.
1
PLAY
STOP
Press the COUNTER MEMORY button twice to make
2
"ALARM. M" to light.
COUNTER
MEMORY ALARM RESET
Notes:
In the cases shown below, Alarm Memory search may be not carried out.
If the alarm recording is not carried out for more than those listed in the following chart then, the alarm may be skipped.
If the alarm recording interval is not left for more than those listed in the following chart then, the alarm may be skipped.
If there is not enough time between the beginning of the alarm search and the first alarm activation. If the time period is shorter
than those listed in the following chart then, the first alarm may be skipped.
Record Minimum alarm recording
mode
A3
A12
A18
A24
41
ALARM
REC
SP
ALARM
ALARM
M
SP
Minimum alarm recording
time needed
3 s
15 s
7 s
27 s
Turn the SHUTTLE dial to set rewind or fast forward.
3
H
REV REV REV
Press the PLAY button.
4
H
PLAY
STOP
Minimum recording time needed between
interval needed start of search and first alarm activations
10 s
50 s
25 s
95 s
ALARM
M
PLAY
When the tape reaches the
FWD FWD FWD
alarm recorded position, The
VTR automatically enters the
still picture mode.
7 s
35 s
15 s
65 s
H
ALARM
SP