Error Message - American Dynamics ADR8045X Instruction Manual

Notes:
In the cases shown below, Alarm Memory search may be not carried out.
If the alarm recording is not carried out for more than those listed in the following chart then, the alarm may be skipped.
If the alarm recording interval is not left for more than those listed in the following chart then, the alarm may be skipped.
If there is not enough time between the beginning of the alarm search and the first alarm activation. If the time period is shorter
than those listed in the following chart then, the first alarm may be skipped.
Record Minimum alarm recording
mode time needed
A3
A12
A18
A24
Tape Remain
When the TAPE REMAIN button is depressed during recording or playback, the counter display changes to the remaining tape
display. The remaining time is the approximately estimated time in the A3-hour mode to tape end.
REC
• The remaining time is the approximate remaining time.
• Displays the remaining tape time estimated in the A3-hour mode.
During computation of the remaining time, the following display appears.
REC
• When the VTR has been used in the recording mode over a long period, it may take considerable time for computation. When
operating at fast speed in the A3-hour mode, the computation is faster.
Note:
It is possible to compute the remaining time for E-180 tape. The display will not be correct for other kinds of tape.

Error Message

When an abnormality occurs during operation, the error code is displayed.
At the same time, the buzzer will sound continuously.
• When the error code "E-1" to "E-4" are
displayed, consult with your dealer.
• When the error code "E-5" is displayed,
the tape is cut. Replace with a new tape.
• Regarding the error code "E-6" Display
When recording in time mode 120 ~ 960 hours or in the One-shot mode, video head clog detection is automatically carried out
once for every two hours. When the video head clog is found, head cleaning is carried out for approximately 10 times. When
cleaning is still not possible, "E-6" is displayed and the HED display blinks on the monitor although recording continues. In
such a case, cleaning of the video heads is required.
Minimum alarm recording
interval needed
3 s
15 s
7 s
27 s
H
SP
H
SP
Code Number
H
E-1
SP
E-3
E-4
E-5
E-6
E-8
Minimum recording time needed between
start of search and first alarm activations
10 s
50 s
25 s
95 s
TAPE REMAIN
Condition of Abnormality
Abnormality on reel rotation during tape running.
Abnormality on cylinder rotation during recording and playback.
Abnormality on tape loading mechanism.
Video tape is cut.
Head clog.
Dew condensation.
7 s
35 s
15 s
65 s
18