Contents Of Screen Display - American Dynamics ADR8045X Instruction Manual

CONTENTS OF SCREEN DISPLAY

The normal MENU screen provides six menus after the initial screen for clock setting. Each MENU screen is shown below.
Press the DISPLAY button for a MENU screen. The menu is selected by pressing the SHIFT button. Then press the SET button to
proceed to the next screen. Use the SHIFT button and the SET button for settings and adjustments in the same manner. To return
to the initial screen press the DISPLAY button.
Monitor Screen (initial screen)
1/ 1/95 SUN
0:00:00 A 3
Monitor Screen (normal screen)
28/8/96 WED
17:30:02 A 3
11
MENU Screen (initial screen)
M E N U
CLOCK SET
SETUP SETUP
DISPLAY MODE
TIME DATE SEARCH
END=[DISPLAY]
MENU Screen (normal screen)
M E N U
CLOCK ADJUST
SETUP SETUP
DISPLAY MODE
PROGRAM
ALARM RECALL
TIME DATE SEARCH
END=[DISPLAY]
M E N U
CLOCK ADJUST
SETUP
DISPLAY MODE
PROGRAM
ALARM RECALL
TIME DATE SEARCH
END=[DISPLAY]
M E N U
CLOCK ADJUST
SETUP SETUP
DISPLAY MODE
PROGRAM
ALARM RECALL
TIME DATE SEARCH
END=[DISPLAY]
CLOCK SET Screen
CLOCK ADJUST
(DAYLIGHT
SAVING TIME) OUT
(DAY) (MONTH) (YEAR)
1 / 1 / '95
SUN
(TIME) 0:00
MENU=[DISPLAY]
CLOCK ADJUST Screen
CLOCK ADJUST
(DAYLIGHT
SAVING TIME) IN
(DAY) (MONTH) (YEAR)
28 / 8 / '96
WED
(TIME) 17:30
MENU=[DISPLAY]
SETUP Screen
S E T U P
ALARM REC TIME 15S
SPEED A 3H
1SHOT REC FIELD 1F
INTERVAL 0.2S
RESTART REC OFF
TAPE END MODE STOP
ALARM STOP
MENU=[DISPLAY]
DISPLAY Screen
DISPLAY
(DATE) ON
(DAY OF THE WEEK) ON
(TIME) ON
(SPEED) ON
(VTR) OFF
(ALARM) ON
(12H/24H) 24H
(CHAR.LINES) 6
MENU=[DISPLAY]
Comment
Setting of clock.
Unless the date-time is
adjusted, the "PROGRAM"
and "ALARM RECALL" will
not appear on the MENU
screen.
Correction of date-time.
Setting of alarm recording
mode (recording time,
recording mode)
Setting of One-Shot record-
ing mode (number of
recording fields, recording
intervals).
Setting of recording for
restoration of power following
a power failure.
Setting of operation after
detection of tape end (tape
end detection mode for tape
end detection during
recording and when an alarm
recording is made).
Setting of display screen
(date, day of week, time,
recording time, VTR number,
alarm).
Setting of time display (24H,
12H).