Power-Adapter Port; Removing The Power-Adapter Port - Dell Inspiron 15 5515 Service Manual

13. Connect the I/O-board cable to the system board.
14. Adhere the tape that secures the I/O-board cable to the system board.
15. Close the right display hinge.
16. Replace the three (M2.5x4) screws that secure the right display-hinge to the palm-rest and keyboard assembly.
Next steps
1. Install the heat sink.
2. Install the fan.
3. Install the wireless card.
4. Install the M.2 2280 solid-state drive
5. Install the M.2 2230 solid-state drive
6. Install the memory module.
7. Install the 3-cell battery
8. Install the base cover.
9. Follow the procedure in

Power-adapter port

Removing the power-adapter port

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
About this task
The following images indicate the location of the power-adapter port and provide a visual representation of the removal
procedure.
Steps
1. Remove the three (M2.5x4) screws that secure the right display-hinge to the system board.
or M.2 2230 solid-state drive
in M.2 slot two, if applicable.
or 4-cell battery, whichever applicable.
After working inside your
Before working inside your
in M.2 slot one, whichever applicable.
computer.
computer.
Removing and installing components 59