Maintenance; Regular Maintenance; Shipping And Storage - Vermeiren Montreal Maintenance Manual

1

Maintenance

Lifetime of the liftchair is strongly influenced by its use, storage, regular maintenance,
servicing and cleaning.
1.1

Regular Maintenance

The maintenance activities to ensure a good condition for your Vermeiren liftchair are
described below:

Before every use

See that all the screws are tightened properly.

Check the liftchair (cleanliness, cracks, damage on upholstery or/and frame ...)
and make it clean.

Do not use your liftchair if you notice any defects but contact your local dealer.

Every 8 weeks: inspection from

Condition of the cushioning materials

Every 6 months or for every new user

General review

Mechanical integrity

Cleanness, Disinfection

Function of the electric parts
For your convenience, on the back of this manual is a maintenance plan.
Repairing and assembling of spare parts for your wheelchair may only be performed by the
specialist dealer.
Only authorized Vermeiren spare parts may be installed.
1.2

Shipping and storage

The shipping and storage of the liftchair shall be according following instructions:

Store in a dry place (between +5 °C and +45 °C).

The relative humidity of the air should be between 30% and 70%.

Provide sufficient covering or packaging to protect the liftchair from rust and foreign
bodies. (e.g. salt water, sea air, sand, dust).

Store all removed parts together in one place (or mark them if necessary) to avoid
mixing up with other products when re-assembling (e.g. the charger).

Components must be stored without being subjected to strains (Do not put too heavy
parts on the liftchair, not clamping between something, ...). Grasp the wheelchair by
solid frame parts only.

Check internal cables for squashing and the prevention of kinks.

Disconnect the power plug out the socket.
Page 2
Liftchair
2014-10