American Dynamics AD8025X Instruction Manual page 37

Using the SHUTTLE Dial
You can also activate the picture search and slow playback of various speed by turning the shuttle dial on the VTR.
The playback speed changes by turning the dial as shown below:
Turn dial to the Reverse direction
2nd STEP Return to
center
REW REW
Reverse
PICTURE
PLAY
SEARCH
(–x 9)
Reverse Reverse
SLOW SLOW
PLAY PLAY
(–x 1/25) (–x 1/25)
If you release the dial, it turns to the center position.
Notes:
• As the SHUTTLE dial is turned in the stop mode, the VTR is set to the FF or REW mode and it does not go back to stop mode
until you press the STOP button. Turning the dial back to initial position does not return the VTR to the stop mode.
• The reverse playback mode will be released automatically after 1 minute and the forward playback will start.
• The still picture mode will be released automatically after 10 minutes and forward playback will start.
• The reverse slow mode will be playback up to 255 fields.
STOP
SHUTTLE dial
1st STEP Return to
center
REW REW
Reverse
PLAY
PLAY
A6, A18: –A18
A3, A12, A24: –A3
Reverse
SLOW
STILL
PLAY
(–x 1/25)
1st
Step
2nd
Step
Turn dial to the Forward direction
Dial
CENTER Return to
1st STEP
center
STOP FF
Forward
PICTURE
PLAY PLAY
SEARCH
(x 9)
Forward
SLOW
STILL STILL
PLAY
(x 1/25)
1st
CENTER
Step
2nd
Step
Return to
2nd STEP
center
FF FF FF
Forward
PICTURE
PLAY
SEARCH
(x 9)
Forward Forward
SLOW SLOW
PLAY PLAY
(x 1/25) (x 1/25)
36