Setting Television Channels - Grundig 32 GLX 3023 Manual

SPECIAL­SETTINGS
Setting­television­channels
This setting is only necessary if a new channel
comes on air and you do not want to change
the order of your channels. The television chan-
nel can be set directly or using the search.
Setting­channels­using­the­search
1 Press »i« to open the »MAIN MENU«.
– T he »MAIN MENU« appears.
2 Select »SETUP« with »
with »●«.
– T he »SETUP« menu appears.
SETUP
SYSTEM
CHANNEL
FINE TUNE
SEARCH
PROGRAM NO
STORE
AUTOPROGRAM
● ●
0 - 9
CHANGE
3 Select »PROGRAM NO« with »
and set the preset channel with »
4 Select »Search« with »
–
the search with »
– I f a strong station signal is received, the
search is interrupted and the picture ap-
pears. Repeat the search until the channel
you want appears on the screen.
Note:
The current system is automatically displayed
7
in the »SYSTEM« line. Select »SYSTEM« with
» « or » « if the colour or sound are incor-
V Λ
+
rect. Select the setting required with » » «.
5 Select »Store« with »
– +
with » « or » «.
– T he »STORED« message appears.
22­
ENGLISH
­-----------------------------------------------------------------------------------------------------
« or » « and confirm
V Λ
B / G
S04
0
r e
P02
BACK
« or »
V Λ
–
« or »
« or » « and start
V Λ
+
« or » «.
–
« or » « and confirm
V Λ
Note:
To set other television stations, repeat steps
7
3­to 5.
6 Press »i« to finish the setting.
Fine­tuning­television­channels
The television automatically tunes itself to the
best possible reception. You may need to carry
out manual fine tuning in areas where there is
poor reception.
1 Press »i« to open the »MAIN MENU«.
– T he »MAIN MENU« appears.
2 Select »SETUP« with »
with »●«.
– T he »SETUP« menu appears.
3 Select »FINE TUNE« with »
set it with »
4 Select »Store« with »
–
with » « or »
– T he »STORED« message appears.
5 Press »i« to finish the setting.
Setting­the­television­channels­by­
entering­the­channel­numbers
1 Press »i« to open the »MAIN MENU«.
– T he »MAIN MENU« appears.
«
+
2 Select »SETUP« with »
«.
with »●«.
– T he »SETUP« menu appears.
3 Select »PROGRAM NO« with »
and set the preset channel with »
4 Select »CHANNEL« with »
5 Press »●« to choose between »S« (special
channel) and »C« (channel).
–
6 Press » « or »
channels or use »1...0« to enter the channel
number directly.
« or
« or » « and confirm
V Λ
« or »
V
– +
« or » «.
« or » « and confirm
V Λ
+
«.
« or » « and confirm
V Λ
V
« or »
V
+
« to switch up and down
« and
Λ
« or » «
Λ
– +
« or » «.
«.
Λ