Philips 5600 Series User Manual page 55

7. When the channel scans finish, the TV programs the number of channels it
added.
Only in connected mode
8.
topic Pausing Live TV
want to set up Live TV Pause, or if this option is not available to you, select
Done to start watching Live TV.
Tip: Repeat the channel scan from time to time to make sure you are receiving all
of the latest channels. Broadcasters add and remove channels, move channels to
different parts of the spectrum, and change the power levels of their channels
periodically. Your antenna reception and picture quality depend on the position of
your antenna and on your location relative to the antennas of broadcasters in your
area. To repeat the channel scan, use the purple directional pad to highlight the
Live TV tile, press STAR , select Scan for channels, and then press OK.
You'll also have to repeat the channel scan if you remove and re-add the Live TV
tile from the Home screen or perform a factory reset.
Now, you're ready to watch live TV! While you're watching, try the following tips:
•
Press UP or DOWN to change channels.
•
Press LEFT to display the channel list, and then press UP or DOWN to select a
channel to watch. Or press REWIND
channel list a page at a time.
, you have the option of setting up Live TV Pause. The
explains how to set up and use this feature. If you don't
41
or FAST FWD to jump through the