Philips 5600 Series User Manual page 42

connected. For each input that has a connected and active device, you can see
its picture and hear its sound.
12. Press UP or DOWN to highlight the label you want to associate with the input,
and then press OK. If you are not using the input, select Nothing, and the input
won't appear on the Home screen.
13. While setting up your devices, rather than using the predefined names and
icons, you can set a custom name and icon. To do so, scroll up or down to
highlight Set custom name & icon, and then press OK. Follow the instructions
on the screen to enter a name and select an icon for the input. See
inputs for more information.
If you specify a custom name for an input, voice commands will not
Note:
reliably switch to that input. Voice commands typically can only switch among
inputs that use built-in names, such as "AV," and "Cable Box," and "DVR."
14. Repeat the previous step for each input.
You're done with Guided Setup.
28
Rename