Hdmi ® Mode (4K Models Only); Control By Mobile Apps - Philips 5600 Series User Manual

®
HDMI mode (4K models only)
On 4K (UHD) TVs, you can independently configure each HDMI
capabilities of the connected device. From the Home screen menu, navigate to
Settings > TV inputs , and then select an enabled HDMI
mode and then select one of the following settings:
•
Auto – Let the TV determine the best setting. Use this option unless your
HDMI ® device does not correctly communicate its HDMI
•
HDMI 1.4 – Configure the input for compatibility with HDMI
supports a maximum refresh rate of 30 Hz at full UHD resolution. Most HDMI
devices will work correctly with the TV in this mode.
•
HDMI 2.0 – Configure the input for compatibility with HDMI
supports a maximum refresh rate of 60 Hz at full UHD resolution. You must use
this mode to view HDR content from the device connected to this HDMI
However, note that many older HDMI
TV's HDMI ®

Control by mobile apps

You can choose the level of control you want to allow your TV to accept from
external devices, such as smart phones, tablets, and virtual assistants. Device connect
settings enable other devices, including the Roku mobile app, to control your TV over
the local area network in your home.
To adjust the level of external control access:
1. From the Home screen menu, navigate to Settings > System > Advanced
system settings > Control by mobile apps .
2. Select Network access .
3. Select one of the following settings:
•
Default – Devices can connect only through a private network address, and
accept commands only from other private network addresses on your
input is set to this mode.
® input. Next, select HDMI
®
devices do not work correctly when the
109
®
input to match the
® version information.
® version 1.4, which
® version 2.0, which
® input.
®