Check Of Oil Pump; Check Side Clearance Between Outer Rotor And Casing - um CBF 125 Service Manual

3.4.2.2. Remove the inner rotor, pin and pin shaft from oil
pump.
3.4.2.3. Take out outer rotor of oil pump and clean the
components disassembled thoroughly.

3.4.3. Check of oil pump

Note:
When checking oil pump, turn the rotor to
measure it at multiple points, so as judge it if
its wear is beyond service limit.
If wear measured at any point is beyond the
service limit, the oil pump shall be replaced
with a new one.
3.4.3.1. Assemble inner and outer rotors, pin shaft, pin
of the oil pump.

Check side clearance between outer rotor and casing

Service limit
CBF 125 AIR COOLING ENGINE SERVICE MANUAL
RENEGADE SPORT & SCRAMBLER X 125 EFI
0.28mm
19