Page 1
DIRETO BELT AND CALIBRATION INSTRUCTIONS ISTRUZIONI INSTRUCTIONS...
Page 2
CINGHIA + GALOPPINO Qui di seguito è possibile trovare il link per effettuare la sostituzione della cinghia e della puleggia nera con il relativo supporto galoppino: https://youtu.be/JOYVSZ3yrX4 Si prega di tenere in considerazione i seguenti punti: - Non piegare eccessivamente la nuova cinghia durante la sostituzione. - Una volta sostituita la cinghia è...
Page 3
BELT +BLACK PULLEY Here below the link with the instructions in order to correctly replace both belt and black pulley: https://youtu.be/JOYVSZ3yrX4 Please note the following things: - Please don’t bend or crimp the new belt during the substitution. - Once the belt has been replaced it is mandatory to correctly tighten it Belt tightening procedure is done by following the offset value whic is placed on the silver label sitted underneath the hometrainer.
Page 6
svitare completamente completely unscrew...
Page 12
- chiudere il blocco (fig. 13); - iniziare a pedalare; - controllare il numero di calibrazione: se questo coincide con con il codice OFFSET (± 1), puoi usare DIRETO; se non coincide, ripetere la procedura di calibrazione. ESEMPIO: Se il numero di OFFSET è 6395, e dopo il cambio cinghia e il primo...
Page 13
- lock the tightner screw lock (pic. 13); - start pedaling; - check calibration number: if this concides with the OFFSET code (± 1), you can use your DIRETO; if this does NOT coincides, repeat the procedure of calibration CASE EXAMPLE:...